This page may require
cleanup to meet basic
quality standards. The specific problem is:
.ini capabilities unexplored, tedious or too old fixes need a check. You can help by
modifying
the article. The
discussion page may contain useful suggestions.
Key points
- Mass Effect 3 can optionally import save games from Mass Effect 2, which in turn can import save games from Mass Effect.
General information
- Official game site
- Mass Effect Wiki
Availability
- All versions require Origin DRM.
- Game will not run in offline mode on Origin. You can bypass it altogether with this
DLC and expansion packs
- This game has in-game micro-transactions (not listed below).
- DLC can be bought through Origin by right clicking Mass Effect 3 and View Game Details or from Amazon
- DLC can be bought on the Bioware Social Network
- DLC can then be downloaded separately from Bioware Social Network or installed automatically via Origin
Name |
Notes |
|
Alternate Appearance Pack 1 |
160 BW Points |
|
Citadel |
1200 BW Points |
|
Earth Multiplayer Expansion |
Free. |
|
Extended Cut |
Free. |
|
The Final Hours Of Mass Effect™ 3 |
|
|
Firefight Pack |
160 BW Points |
|
From Ashes |
Included in Digital Deluxe or 800 BW Points |
|
Genesis 2 |
320 BW Points |
|
Groundside Resistance Pack |
160 BW Points |
|
Leviathan |
800 BW Points |
|
M90 Indra Sniper Rifle |
Redeemable through Alienware Promo or Included with Firefight Pack |
|
Mass Effect™ Trilogy Art |
Included in Mass Effect Trilogy bundle |
|
Mass Effect 3 Digital Art Books |
Included in Digital Deluxe |
|
Mass Effect 3 Soundtrack |
Included in Digital Deluxe |
|
N7 Collector's Edition materials |
Included in Digital Deluxe |
|
Omega |
1200 BW Points |
|
Reckoner Knight Armor |
Obtained by logging in to account in Kingdoms of Amalur: Reckoning demo[2] (The demo is available on Steam) |
|
Reckoning Multiplayer Expansion |
Free. |
|
Rebellion Multiplayer Expansion |
Free. |
|
Resurgence Multiplayer Expansion |
Free. |
|
Retaliation Multiplayer Expansion |
Free. |
|
Essential improvements
Skip intro videos
Modify ME3_sig_logo in bioengine.ini[4]
|
- Download and run ME3 Coalesced Utility.
- In the utility open
Coalesced.bin from <path-to-game>\BIOGame\CookedPCConsole\
- Go to the
bioengine.ini > fullscreenmovie > startupmovies section.
- Add a semicolon in front of the
ME3_sig_logo line like so: ;ME3_sig_logo
- Save the file and exit the utility.
|
HD Texture Pack
- A Lot of Textures(ALOT) is a re-texture project aiming to bring Mass Effect 3's textures to today's standards, replacing around 2200 textures with high-resolution variants.
Game data
In-game general settings.
In-game narrative settings.
Configuration file(s) location
Save game data location
Video settings
Template:Video settings
- If the taskbar appears on top, set the game to Fullscreen and then back to Window (No Border) to eliminate it.[5]
- By default the game only has FXAA for anti-aliasing. But is possible to force other anti-aliasing types.
Use NVIDIA Inspector (NVIDIA only)[citation needed]
|
- Download and launch NVIDIA Profile Inspector
- Choose Mass Effect 3 from the profile list
- MSAA
- Change
Antialiasing - Mode to Override any application setting
- Change
Antialiasing - Setting to 4x [4x Multisampling] or 8xQ [8x Multisampling] or 16xQ [16x CSAA (8 color + 8 cv samples)]
- (Optional) Change
Antialiasing - Transparency Multisampling to Enabled to enable transparency multisampling. Or you can change Antialiasing - Transparency Supersampling to one of the supersampling options to enable transparency supersampling.
- SGSSAA
- Change
Antialiasing compatibility to 0x080000C1 [6][7][8]
- Change
Antialiasing - Mode to Override any application setting
- Change
Antialiasing - Setting to 4x [4x Multisampling] or 8xQ [8x Multisampling]
- Change
Antialiasing - Transparency Supersampling to 4x Sparse Grid Supersampling or 8x Sparse Grid Supersampling
- Apply changes.
Notes
- Default compatibility bits for anti-aliasing (0x080100C5) should be enough for MSAA. Therefore there is no need to change them when using MSAA.
- If you are a SLI user and using SGSSAA you might want to change
SLI compatibility bits to 0x42502005 for improved performance.[8]
- If forcing AA causes video stutter, activating MSI Afterburner's OSD can fix it.
|
Disable 62 FPS cap[citation needed]
|
- Go to the configuration file(s) location.
- Open
Gamersettings.ini .
- Add the following under
[SystemSettings]
bSmoothFrameRate=FALSE
SmoothFrameRate=False
Notes
- Causes issues in the game. Enemies will be more accurate and your shields will recharge slower. Prevents usage of powers from cover unless you first lean out manually.
|
Input settings
In-game general control settings.
In-game key map settings.
Template:Input settings
Complete Xbox 360 interface restoration:
http://www.nexusmods.com/masseffect3/mods/407/?
https://me3tweaks.com/forums/viewtopic.php?f=5&t=5
Replace Coalesced.bin[10]
|
- Download the replacement Coalesced.bin.
- Move it to
<path-to-game>\BIOGame\CookedPCConsole , replacing the existing file.
- Connect your controller and launch Mass Effect 3. The controller should now work.
Notes
- The mouse is still required in menus and conversations.
- If you have made other changes to
Coalesced.bin you will need to redo them.
|
Audio settings
Template:Audio settings
Localizations
Language |
UI |
Audio |
Sub |
Notes |
English |
|
|
|
|
French |
|
|
|
|
German |
|
|
|
|
Italian |
|
|
|
|
Polish |
|
|
|
|
Russian |
|
|
|
|
Spanish |
|
|
|
|
Network
Multiplayer types
Type |
Native |
Players |
Notes |
LAN play |
| 4 |
Co-op Use ME3 Private Server Emulator/LAN. |
Online play |
| 4 |
Co-op Multiplayer activity and progress affects the singleplayer storyline. Note that the Extended Cut DLC modifies the game such that playing the multiplayer is not required for the "best" singleplayer story ending. |
Connection types
Ports
Protocol |
Port(s) and/or port range(s) |
UDP |
5659, 6000 |
- Universal Plug and Play (UPnP) support status is unknown.
VR support
Issues fixed
- GeForce.com has created a comprehensive guide for fixing issues in this game.
"Origin (EA) is no longer running. Mass Effect 3 will now close"
Reinstall Origin into default folder[11]
|
Make sure Origin is installed in the default folder (C:\Program Files (x86)\Origin\ ), not on another drive.
|
64bit Version Error Message
64bit Version Error Message[citation needed]
|
The following error message may appear:
- The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher.
- Selecting Mass Effect 3 in Origin and clicking 'repair install' and 'check for update' may fix this issue.
|
Mouse Causing Stuttering
Mouse movement may cause slowdowns. This can be fixed by disabling Origin overlay within the game.
Mouse Causing Stuttering[citation needed]
|
- Click on the gear in the top right.
- Click "Settings".
- Click the "In Game" tab.
- Make sure "Enable Origin In Game" is disabled
|
MSVCR90.dll startup Crash
- Sometimes the game crashes with an error about MSVCR90.dll.
Delete save folder[citation needed]
|
- Go to
%USERPROFILE%\Documents\Bioware
- Delete the
Save folder.
|
Startup Crash 2
This error message may appear on startup:[12]
Problem signature:
Problem Event Name: BEX
Application Name: MassEffect3.exe
Application Version: 1.1.5427.4
Application Timestamp: 4f46d052
Fault Module Name: awc.dll
Fault Module Version: 3.2.4.6
Fault Module Timestamp: 4ee2521d
Exception Offset: 0008342f
Exception Code: c0000417
Exception Data: 00000000
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 636e
Additional Information 2: 636ed4ad6e2ce5a3e01564e40133fee8
Additional Information 3: 61e2
Additional Information 4: 61e20e96bfcd8b3479be5a6b63429556
Going into the folder C:\Program Files (x86)\Bioware\Mass Effect 3\Binaries\Win32\
and remove or rename the "atiags.dll" may fix this issue.
Crash on From Ashes DLC
Crash on From Ashes DLC[citation needed]
|
At Eden Prime, shortly after watching the cutscene for the first pod, the player crashes.
- To fix this, access the second pod first, and then the first pod.
- There is a second way to fix this so you can watch the vids in order: And that is right after the first vid has done playing start pressing your escape button a few times.
|
Retail DVD Install Issue
Some users experience issues installing Mass Effect 3 from a retail disc. After starting the install process and entering the product key, an error message claiming it is not a valid Mass Effect 3 serial number appears. Despite this, Mass Effect 3 will now be activated in your Origin library. Further attempts to run the installation process will still prompt for a product key, and upon entering it will result in an error message stating the key has already been used. It is impossible to continue the install process from this point.
There are two possible solutions to this issue. The first and easiest option is to simply download Mass Effect 3 via Origin. However, for those on slower or bandwidth limited internet connections, this may not be a viable option. It is still possible to install from the DVDs using the following workaround:
Retail DVD Install Issue[citation needed]
|
- Start downloading Mass Effect 3 via Origin, pause the download and exit Origin.
- Delete all files in the Mass Effect 3 subfolder of Origin's game install folder. By Default this is
C:\Program Files\Origin Games\Mass Effect 3 Also, delete all files in Origin's download cache %PROGRAMDATA%\Origin\DownloadCache
- Copy the file
Mass Effect 3.z01 from disc 1 and Mass Effect 3.zip from disc 2 to a temporary location on your hard drive.
- Extract these files to the Mass Effect 3 folder in Origin's game install folder. Default
C:\Program Files\Origin Games\Mass Effect 3 (NOTE: Traditional unzipping software such as WinRAR or 7-zip may experience critical errors extracting these files. If this occurs, you can use a program called Total Commander to extract them. In Total Commander some error messages will appear, but these can be ignored)
- Remove the read-only attribute to these files and folders (Right Click on the folder in Windows, select properties and uncheck the "Read-only" box).
- Launch Origin and resume the download. A small download of approximately 60 MB should start to fix missing or broken files. After this, Mass Effect 3 should be fully installed and working.
|
Origin Install Issue
In some cases where Mass Effect 3 has been downloaded through Origin, upon installation users are met with this error message:
Error: The VC++ runtime redistributable package was not installed successfully. Setup cannot continue.
In order to solve the issue:
Origin Install Issue[citation needed]
|
- Exit Origin.
- Go to the Control Panel and uninstall any 'Microsoft Visual C++ 20XX' packages you may have.
- Download both the 2010 x64 and 2010 x86 redistributable files from the Microsoft website.
- Once both files have downloaded successfully, navigate to Mass Effect 3's installation folder, default is
C:\Program Files\Origin Games\Mass Effect 3\__Installer\vc\vc2008sp1\redist\
- Inside that folder, either delete or rename both the vcredist_x64.exe and vcredist_x86.exe and replace them with your newly downloaded versions.
- Open Origin and install the game.
|
Language Fix
If you buy the game on Origin and discover the in-game menu and subtitles are a different language then English, there is a way to correct it;
Language Fix[citation needed]
|
After you have downloaded and installed the game:
- Download the language pack: From MediaFire
- Go to
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BioWare\Mass Effect 3
- Now change the
Locale data to: en_US and change the final part of GDFBinary path to GDFBinary_en_US.dll by right clicking the relevant row and pressing 'edit value'.
- After changing these values go to
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Origin Games\71402
- Now change the
Locale value to en_US by right clicking the relevant row and pressing 'edit value'.
Now replace the CookedPCConsole folder found in Mass Effect 3\BIOGame with the one found in the language pack, and accept all the changes and overwrites.
Finally, delete the BIOGame_RUS.tlk in your Mass Effect 3\BIOGame\CookedPCConsole folder and rename the BIOGame_INT.tlk language file, that you will find in the CookedPCConsole folder after you have replaced it with the one found in the language pack, to BIOGame_RUS.tlk .
Mass effect 3 is now fully in English.
|
DLC Error
DLC Error[citation needed]
|
Sometimes the game will have problems loading DLC (both free and paid DLC) and will present an error message stating "Unable to authorize the listed DLC. Please log in to the Alliance Network with the account used to purchase the DLC". This is usually caused by an error during the download.
- To solve the error, open Origin and bring up Mass Effect 3's information by clicking the "i" icon below it.
- Right click on the DLC causing the error and select "Check for update".
- A download should begin to download any missing or broken files.
- The DLC should work the next time you launch the game.
|
Unable to save any more games
Increase 50 save limit[13][citation needed]
|
- Download ME3 Explorer
- Run ME3Explorer and select PCC Editor 2.0 (under Developer Tools)
- Provide game executable situated in
<path-to-game>\Binaries\MassEffect3.exe
- Go to File > Load and open
<path-to-game>\BIOGame\CookedPCConsole\SFXGame.pcc
- Choose Exports tab and scroll down to the 45241 line
- Select it and set MaxSaves IntProperty to a big number like 999
- Go to File > Save
|
Importing
Import Save Game
Import From Mass Effect 2 Folder
Import From Mass Effect 2 Folder[citation needed]
|
- Mass Effect 3 does not use an import save game data in the same way that one could import save game data from Mass Effect to Mass Effect 2. Instead, it detects an existing Mass Effect 2 save games folder (as if Mass Effect 2 was installed and completed). Therefore there should be no issue as long as the same computer used to complete Mass Effect 2 is used to start a new game in Mass Effect 3.
|
Import Without Reinstalling
Import Without Reinstalling[14]
|
To import a Mass Effect 2 save file from an old computer to the one in which Mass Effect 3 is currently installed, copy your old career folders to: %USERPROFILE%\Documents\Bioware\Mass Effect 2\Save\
|
Lost Old Save Game
Lost Old Save Game[citation needed]
|
- One can replace an old save game by going to Mass Effect 2 Saves, which is a repository of Mass Effect 2 save games with various playthroughs which can be imported into Mass Effect 3.
|
Save Game Not Detected
If a Mass Effect 2 save game is not detected, there are currently some methods to fix this.
Rename Save Game Folder[citation needed]
|
- A save editor may have changed the folder structure. Change this back to allow Mass Effect 3 to autodetect correctly.
- Go to
%USERPROFILE%\Documents\Bioware\Mass Effect 2\Save\
- Change the folder name to
Name_12_Class_012610
|
Edit GamerSettings.ini[citation needed]
|
- Go to the configuration file(s) location.
- Open
GamerSettings.ini .
- Add your Mass Effect 2 saves folder location next to
Location=
- Example:
[SaveGames]
Location=%USERPROFILE%\Documents\BioWare\Mass Effect 2\Save\
- Make sure that the above location is the correct location of your save games.
|
Multiplayer game using "Different Version"
- When attempting to join a game an error will display that you cannot join due to the executable being version 1.6 instead of 1.5
Replace exe file if wrong version[citation needed]
|
- Go to
<path-to-game>\Mass Effect 3\Binaries\Win32\
- Right click
MassEffect3.exe , select properties, choose the details tab, under "file version" it should start with 1.5.xxxx.xxx
- If not, make a backup of that executable and replace the original with this 1.5 version.
|
Other information
API
Technical specs |
Supported |
Notes |
Direct3D |
9 |
|
Shader Model support |
3 |
|
Executable |
32-bit |
64-bit |
Notes |
Windows |
|
|
|
Middleware
Ambient occlusion
- Default NVIDIA driver profile does not have compatibility bits to enable ambient occlusion for the game. But it can be enabled by tweaking the driver profile settings.
Use NVIDIA Inspector (NVIDIA only)[citation needed]
|
- Download and launch NVIDIA Profile Inspector
- Choose Mass Effect 3 from the profile list
- Change
Ambient Occlusion compatibility to 0x00000020 [15]
- Change
Ambient Occlusion usage to Enabled
- Change
Ambient Occlusion setting to Performance , Quality or High quality
- Apply changes.
|
Mods
- Mass Effect 3 Nexus - One of the most popular modding communities, has decent amount of mods for Mass Effect 3.
- ME3Explorer - A multi-tool software for modding Mass Effect 3. Also includes a Coalesced.bin editor for further tweaking.
System requirements
Windows |
|
Minimum |
Recommended |
Operating system (OS) |
XP |
Vista, 7 |
Processor (CPU) |
Intel Core 2 Duo 1.8 GHz
| Intel Core 2 Duo 2.4 GHz |
System memory (RAM) |
1 GB (XP) 2 GB (Vista, 7) |
2 GB (XP) 4 GB (Vista, 7) |
Hard disk drive (HDD) |
15 GB | |
Video card (GPU) |
ATI Radeon X1800 Nvidia GeForce 7900 256 MB of VRAM DirectX 9.0c compatible Shader model 3 support |
ATI Radeon HD 4850 Nvidia GeForce 9800 GT Nvidia GeForce GTX 550 Ti 512 MB of VRAM |
- AMD video cards below minimum system requirements: Radeon HD 3200, HD 3300, HD 4350
- Nvidia video cards below minimum system requirements: GeForce 9300, 8500, 8400, and 8300
- S3 video cards are not supported
References