Key points
- The Sixaxis controller is an earlier variant of the DualShock 3 controller, lacking force feedback. See Sixaxis.
- Remove MotionInJoy and Better DS3 if they are installed. See Removing MotionInJoy.
- DualShock 3 controllers can be used either wired via USB Mini-B cable or wireless with Bluetooth dongles supporting Bluetooth 2.0+EDR.
- Has non-standard HID descriptors[1] and broken Bluetooth protocol[2] that require specific drivers fixes to be used.
PS3 Controller on Windows (Wired, official drivers)
Setup
|
- There is no need to have a program running in the background, once the drivers are installed the controller works.
- While the drivers might be official, they don't work on nearly as many games as the unofficial ones due to not supporting the 360 controllers Xinput, and to make matters even worse, not using conventional input values.
- Plug in the Dualshock 3 or SIXAXIS controller into the computer, and if prompted, install the dummy drivers. These are not designed to make the controller usable, they are just there to make it so windows can identify them.
- Download and install the Playstation Now application
Notes
- If the installer gets stuck, take a toothpick or a needle and press down the reset button in the small hole on the back of the device.
- You can freely uninstall Playstation Now after the driver installation, they will stay as long as you don't uninstall the driver package.
|
PS3 Controller on Windows (Wired, unofficial drivers)
Step One
Setup
|
- Plug-in the controller and let Windows install any drivers if prompted.
- Download the DualShock XInput Wrapper.
- Push ⊞ Win+R and type
%SystemDrive% then select OK and extract the ScpServer folder in that location.
|
Step Two
Windows 8 and Windows 10
|
- Run
ScpServer\Binaries\SCPDriver.exe and uncheck the Bluetooth checkbox then select Install.
- If the controller still does not connect (may involve the controller number LEDs all flashing), uninstall and then retry while having Force Install checked before selecting Install again.
|
Windows 7
|
- Download and install the Xbox 360 Controller Drivers.
- Run
ScpServer\Binaries\SCPDriver.exe
- Check the Force Install checkbox and uncheck the Bluetooth checkbox then select Install.
|
Windows XP and Windows Vista
|
- Run
ScpServer\Binaries\SCPDriver.exe
- Check the Force Install checkbox and uncheck the Bluetooth checkbox then select Install.
- Download and install the Xbox 360 Controller Drivers.
|
PS3 Controller on Windows (Bluetooth)
- Other Bluetooth devices cannot be used.
Step One
Setup
|
- Plug-in the controller and let Windows install any drivers if prompted.
- Download the DualShock XInput Wrapper.
- Push ⊞ Win+R and type
%SystemDrive% then select OK and extract the ScpServer folder in that location.
|
Step Two
Windows 8 and Windows 10
|
- Run
ScpServer\Binaries\SCPDriver.exe and check the Bluetooth checkbox then select Install.
|
Windows 7
|
- Download and install the Xbox 360 Controller Drivers.
- Run
ScpServer\Binaries\SCPDriver.exe
- Check the Force Install checkbox and check the Bluetooth checkbox then select Install.
|
Windows XP and Windows Vista
|
- Run
ScpServer\Binaries\SCPDriver.exe
- Check the Force Install checkbox and check the Bluetooth checkbox then select Install.
- Download and install the Xbox 360 Controller Drivers.
|
Step Three
Bluetooth Device Name
|
- Push ⊞ Win+R and type control printers then select OK.
- Insert the Bluetooth dongle, then copy the last name which shows up.
|
Step Four
Bluetooth Driver
|
- Run
ScpServer\Binaries\zadig\zadig.exe
- Under Device select Load Preset Device and Bluetooth.cfg then select Open.
- Under Options select List All Devices.
- Select the name found in control printers from the dropdown menu, then select Replace Driver.
- Unplug the controller.
Notes
- Pair the controller to the desired computer by plugging it in. Unplug it to use it with the Bluetooth dongle.
- If the controller isn't working push the central Home button to turn it on, plug it into the desired computer, then unplug it.
- If the device isn't being paired try reinstalling the DualShock 3 Driver.
|
Bluetooth Driver Removal
- If the instructions didn't work then remove the Bluetooth drivers and try something else.
- If the device manager asks to restart select No.
Instructions
|
- Plug-in the desired Bluetooth device.
- Push ⊞ Win+R and type devmgmt.msc then push OK.
- Find the desired Bluetooth device under Universal Serial Bus devices.
- Right Click on it then select Uninstall and select the Delete the driver software for this device checkbox.
- Unplug the Bluetooth device, then plug it in again.
- Find the desired Bluetooth device under Bluetooth.
- Right Click on it then select Uninstall and select the Delete the driver software for this device checkbox.
- Unplug the Bluetooth device, then plug it in again.
- Reinstall the drivers for the appropiate device. See Bluetooth.
Notes
- If the drivers are not working find them on the manufacturer's website.
|
PS3 Controller on OS X
OS X 10.7 and Newer
|
- Plug-in the desired controller and ignore the Pairing Request.
- Go to Bluetooth Preferences.
- Select Connected and Configured and deselect Paired if needed.
- Find the PlayStation3 controller in the list, and add it to the favourites.
|
OS X 10.6 and Older
|
Download and install this driver.
|
PS3 Controller on Linux
Steam
- Controller can be found in Supported Controller Database and it's correctly recognizable as PlayStation DualShock 3 controller.
- Not capable of making full use of Steam Input. Gyroscope is not supported in configuration menu.
Steam Link compatibility
- Natively supported wired and wireless (since beta build 554).[3]
- Works without any drivers on any operating system that supports Steam.
- Can be used just to send input from a controller to a PC. Go into Streaming options, hit Y and disable video and audio streaming.
- To pair over bluetooth connect via USB cable press PS button. Unplug USB cable then press again PS button and now DS3 works over bluetooth.
- Some clones (CECHZC2H Bluetooth DualShochIII and OUBANG PS3 Controller Wireless Dualshock3) won't work wirelessly.[4]
- Won't work great unless you connect it to LAN or a low latency Wi-Fi.
Hardware
- All controllers that can be paired and work with regular PlayStation 3 should work, including third party ones.
- Has switch on side of adapter, allowing for both XInput and DirectInput modes natively. XInput should work with regular drivers, for rumble to work with DirectInput mode, drivers needs to be downloaded manufacturers website.
- Can connect one controller in XInput Mode and four controllers in DirectInput Mode.
- Includes turbo mode. Pressing "PlayStation" and button toggles turbo for that button. To disable turbo for all buttons press PlayStation button twice quickly.
Issues fixed
Controller no longer detected or working (Windows)
Instructions
|
- Plug-in the desired controller.
- Run
ScpServer\Binaries\SCPDriver.exe and select Uninstall. Check the Bluetooth Driver checkbox if needed.
- See PS3 Controller on Windows.
|
Playing with multiple PlayStation 3 Controllers on Windows
- Set up the Xbox 360 Controller Emulator, then play the desired multiplayer game with multiple controllers, such as Lego Marvel Super Heroes.
Games with DualShock button prompts
- Please note, that this is only list for games that offer DualShock button prompts.
- Some may require use of DualShock 4, which right now isn't possible to emulate. Refer to game-specific articles for details.
{{#ask: Buttons prompts::DualShock
| ?Developed by = Developer
| ?Published by = Publisher
| ?Uses engine = Engine
| ?Release date = First release |+limit=1
| ?Available on = Systems
| Sort = Release date
| Order = descending
| limit = 20
| introtemplate = Infobox company/intro/company
| outrotemplate = Infobox company/outro
| template = Infobox company/row/company
| format = template
| default =
}}
Other information
Removing MotionInJoy
- Due to the way MotionInJoy behaves a full reformat is advised instead. The following steps could potentially harm Windows, backup any important files before following these instructions.
- MotionInJoy should be always treated as badware due to its odd and overall harmful behaviour. It can trigger BSODs, crashes and other major system issues.
Instructions[5]
|
- Download Geek Uninstaller, then extract it anywhere.
- Find MotionInJoy in the list, then Double Click on it, select Finish when asked to remove any leftover items.
- Open a command prompt as an admin.
- Type and run
pnputil.exe -e , and find MotionInJoy's *.inf ID, under the Published name field.
- Replace the star with MotionInJoy's ID in the following command
pnputil.exe -f -d *.inf and run it.
- Navigate to
%WINDIR%\System32\drivers\ and remove MijXfilt.sys.
Notes
- Geek Uninstaller is portable and as such can be easily removed afterwards.
- Deleting any system files in use could potentially break the current Windows installation.
|
Overridden Bluetooth Driver
|
- Plug-in the desired bluetooth device.
- Open Devices and Printers, and find the desired device.
- Right Click on the device, select Properties, the Hardware tab, and Properties again.
- Select Change Settings, Authenticate, the Driver tab, and Uninstall.
- When asked to remove the device's software select OK.
- Remove and plug-in again the desired device.
|
Technical information
- Wireless controller, HWID: 054C:0268
References