Difference between revisions of "Controller:Fanatec CSL Elite"
Yuuyatails (talk | contribs) m |
Yuuyatails (talk | contribs) |
||
(16 intermediate revisions by 2 users not shown) | |||
Line 4: | Line 4: | ||
|cover = Fanatec CSL Elite PS4.jpg | |cover = Fanatec CSL Elite PS4.jpg | ||
|xinput = hackable | |xinput = hackable | ||
− | |predecessor = [[Controller:Fanatec | + | |predecessor = [[Controller:Fanatec ClubSport|Fanatec ClubSport]] |
|connection method = USB-B | |connection method = USB-B | ||
|successor = [[Controller:Fanatec CSL DD|Fanatec CSL DD]]<br>[[Controller:Fanatec Gran Turismo DD Pro|Fanatec Gran Turismo DD Pro]] | |successor = [[Controller:Fanatec CSL DD|Fanatec CSL DD]]<br>[[Controller:Fanatec Gran Turismo DD Pro|Fanatec Gran Turismo DD Pro]] | ||
Line 12: | Line 12: | ||
|introduction = The '''Fanatec CSL Elite''' is a racing wheel base released by Fanatec in August 2016. | |introduction = The '''Fanatec CSL Elite''' is a racing wheel base released by Fanatec in August 2016. | ||
− | Being a tier below the high-end [[Controller:Fanatec | + | Being a tier below the high-end [[Controller:Fanatec ClubSport|ClubSport wheel base]], the CSL Elite wheel base has a single gear toothed belt-driven force feedback instead of the dual V-ribbed belts. The brushless motor's torque rating has also been reduced from 8Nm of that of the ClubSport to 6Nm. The wheel base's outer construction is made mostly of ABS plastic, and has the rev indicator LEDs on the top of the wheel base. Just like many Fanatec wheel bases, it has the QR1 quick release and on the back, it has four RJ12 ports for accessories. |
− | |release history = The updated | + | |release history = The updated '''V1.1''' model, released in June 2019, fixed the issue in the original wheel base where the damper setting is too strong and cannot be turned off, along with using the motor and encoders from the ClubSport wheel base. The PlayStation-compatible version of the wheel base which the V1.1 model is based on, the '''CSL Elite Wheel Base+''', was released in June 2017 as part of a bundle set<ref>{{Refurl|url=https://www.gtplanet.net/fanatec-playstation-4-csl-elite-wheel/|title=Fanatec Announces PS4-Compatible CSL Elite Wheel - GTPlanet|date=June 2023}}</ref> and later released as a standalone wheel base in June 2018.<ref>{{Refurl|url=https://www.gtplanet.net/fanatec-announces-standalone-csl-elite-wheel-base-for-ps4/|title=Fanatec Announces Standalone CSL Elite Wheel Base + for PS4 - GTPlanet|date=June 2023}}</ref> |
− | |current state = On PC, all versions of the CSL Elite wheel base are compatible with games that incorporate Fanatec's SDK, but requires the wheel base to be in PC mode and have Fanatec's own [https://fanatec.com/driver driver] installed to work. The wheel base's settings can be further adjusted using | + | |current state = On PC, all versions of the CSL Elite wheel base are compatible with games that incorporate Fanatec's SDK, but requires the wheel base to be in PC mode and have Fanatec's own [https://fanatec.com/driver driver] installed to work. The wheel base's settings can be further adjusted using the wheel base itself, the driver's Fanatec Control Panel software or, in case of the CSL Elite Wheel Base+, the [https://forum.fanatec.com/categories/fanalab Fanalab] software. While most bundle sets have most, if not all, the required items to work out of the box, the standalone wheel base sets needs other Fanatec products (specifically, a steering wheel compatible with QR1 quick release) to be usable. It doesn't support wheels with QR2 quick release. Button layouts vary between equipped steering wheels/hubs. |
}} | }} | ||
Line 24: | Line 24: | ||
{{mm}}[https://fanatec.com/eu-en/racing-wheels-wheel-bases/wheel-bases/csl-elite-wheel-base-officially-licensed-for-playstation Elite wheel base+] | {{mm}}[https://fanatec.com/eu-en/racing-wheels-wheel-bases/wheel-bases/csl-elite-wheel-base-officially-licensed-for-playstation Elite wheel base+] | ||
{{mm}}[https://fanatec.com/eu-en/anniversary-sale/csl-elite-wheel-base-v1.1 V1.1 wheel base] | {{mm}}[https://fanatec.com/eu-en/anniversary-sale/csl-elite-wheel-base-v1.1 V1.1 wheel base] | ||
− | {{mm}}[https://fanatec.com/eu-en/bundles/csl-elite-playstation-starter-kit CSL Elite PlayStation Starter Kit] | + | {{mm}}[https://web.archive.org/web/20230320212037/https://fanatec.com/eu-en/bundles/csl-elite-playstation-starter-kit CSL Elite PlayStation Starter Kit (Archived)] |
'''Inputs (with CSL Elite PlayStation Starter Kit)''' | '''Inputs (with CSL Elite PlayStation Starter Kit)''' | ||
* 1 × 2-axis steering wheel axle with 1080 degree lock-to-lock | * 1 × 2-axis steering wheel axle with 1080 degree lock-to-lock | ||
− | * 1 × power button on | + | * 1 × power button on the base: {{Key|ᴘᴏᴡᴇʀ}} |
− | * 1 × mode switch button on | + | * 1 × rev indicator LEDs on the base |
+ | * 1 × mode switch button on the base: {{Key|ᴍᴏᴅᴇ}} | ||
* 2 × steering-mounted paddles on the wheel: {{Key|L1}}, {{Key|R1}} | * 2 × steering-mounted paddles on the wheel: {{Key|L1}}, {{Key|R1}} | ||
* 1 × clickable digital directional joystick on the wheel: {{Key|↑}}, {{Key|↓}}, {{Key|←}}, {{Key|→}} | * 1 × clickable digital directional joystick on the wheel: {{Key|↑}}, {{Key|↓}}, {{Key|←}}, {{Key|→}} | ||
Line 35: | Line 36: | ||
* 4 × digital functional buttons on the wheel: {{Key|sʜᴀʀᴇ}}, {{Key|ᴏᴘᴛɪᴏɴs}}, {{Key|PlayStation}}, {{Key|ᴡʀᴇɴᴄʜ}} | * 4 × digital functional buttons on the wheel: {{Key|sʜᴀʀᴇ}}, {{Key|ᴏᴘᴛɪᴏɴs}}, {{Key|PlayStation}}, {{Key|ᴡʀᴇɴᴄʜ}} | ||
* 2 × analog foot pedals on the CSL Elite Pedals: {{Key|ʙʀᴀᴋᴇ}}, {{Key|ᴀᴄᴄᴇʟ}} | * 2 × analog foot pedals on the CSL Elite Pedals: {{Key|ʙʀᴀᴋᴇ}}, {{Key|ᴀᴄᴄᴇʟ}} | ||
− | * 1 × rev indicator LED on the wheel | + | * 1 × rev indicator LED + 3-segment LEDs on the wheel |
==Availability== | ==Availability== | ||
Line 60: | Line 61: | ||
====[https://forum.fanatec.com/categories/fanalab Fanalab]==== | ====[https://forum.fanatec.com/categories/fanalab Fanalab]==== | ||
− | {{ii}}Note that the compatibility between the driver and the Fanalab software varies from versions to versions, but it is recommended to update both to the latest version. <ref>[https://admin.forum.fanatec.com/discussion/comment/74819/#Comment_74819 Maurice Böschen's comment in Which version of Fanalab corresponds to which driver version? - Fanatec Forum]</ref> | + | {{ii}}Note that the compatibility between the driver and the Fanalab software varies from versions to versions, but it is recommended to update both to the latest version.<ref>[https://admin.forum.fanatec.com/discussion/comment/74819/#Comment_74819 Maurice Böschen's comment in Which version of Fanalab corresponds to which driver version? - Fanatec Forum]</ref> |
{{++}} The steering sensitivity, various force feedback settings, steering locks, pedal sensitivity, shifter/handbrake settings can be adjusted. | {{++}} The steering sensitivity, various force feedback settings, steering locks, pedal sensitivity, shifter/handbrake settings can be adjusted. | ||
{{++}} LEDs on certain Fanatec steering wheels can be customized. | {{++}} LEDs on certain Fanatec steering wheels can be customized. | ||
Line 83: | Line 84: | ||
{{ii}} Is included as part of the [https://fanatec.com/us-en/pedals/csl-pedals-lc CSL Pedals LC] set. | {{ii}} Is included as part of the [https://fanatec.com/us-en/pedals/csl-pedals-lc CSL Pedals LC] set. | ||
{{++}} Has its own control box that allows the expanded CSL Pedals to be directly connected to either the wheel base via RJ12 or to the PC via USB. | {{++}} Has its own control box that allows the expanded CSL Pedals to be directly connected to either the wheel base via RJ12 or to the PC via USB. | ||
+ | |||
+ | ====[https://fanatec.com/eu-en/pedals/csl-elite-pedals-v2 Fanatec CSL Elite Pedal V2]==== | ||
+ | {{ii}} Pedal set with 2 hall-effect sensor-based pedals and a load cell-based pedal. The load cell pedal can support up to 90 kg. | ||
+ | {{++}} Elastomer springs and pre-load medal spring can be changed with the included kit for adjustment. | ||
+ | {{++}} Has removable rubber pedal plate covers. | ||
+ | {{++}} Can be directly connected to either the wheel base via RJ12 or to the PC via USB. | ||
+ | {{++}} Has a dedicated RJ12 port for connecting the [[#Fanatec ClubSport Handbrake V1.5|ClubSport Handbrake V1.5]] to. | ||
====[https://fanatec.com/eu-en/cockpits-mounting/clubsport-table-clamp-v2 Fanatec CSL Table Clamp V2]==== | ====[https://fanatec.com/eu-en/cockpits-mounting/clubsport-table-clamp-v2 Fanatec CSL Table Clamp V2]==== | ||
− | {{ii}} Aluminum-made table clamp that is compatible with | + | {{ii}} Aluminum-made table clamp that is compatible with ClubSport, CSL Elite, Podium, CSL DD and Gran Tursimo DD Pro. |
====[https://fanatec.com/us-en/shifters-others/clubsport-shifter-sq-v-1.5 Fanatec ClubSport Shifter SQ V1.5]==== | ====[https://fanatec.com/us-en/shifters-others/clubsport-shifter-sq-v-1.5 Fanatec ClubSport Shifter SQ V1.5]==== | ||
Line 93: | Line 101: | ||
====[https://fanatec.com/us-en/shifters-others/clubsport-handbrake-v1.5 Fanatec ClubSport Handbrake V1.5]==== | ====[https://fanatec.com/us-en/shifters-others/clubsport-handbrake-v1.5 Fanatec ClubSport Handbrake V1.5]==== | ||
− | {{ii}} | + | {{ii}} Analog Handbrake |
− | {{++}} Can be directly connected to either the wheel base via RJ12 or to PC via the [[#Fanatec ClubSport USB Adapter|Fanatec ClubSport USB Adapter]]. | + | {{++}} Can be directly connected to either the wheel base or certain Fanatec pedals via RJ12 or to PC via the [[#Fanatec ClubSport USB Adapter|Fanatec ClubSport USB Adapter]]. |
{{--}} Must use the [https://fanatec.com/us-en/cockpits-mounting/clubsport-shifter-table-clamp ClubSport Shifter Table Clamp] to be clamped onto the desk. | {{--}} Must use the [https://fanatec.com/us-en/cockpits-mounting/clubsport-shifter-table-clamp ClubSport Shifter Table Clamp] to be clamped onto the desk. | ||
Line 110: | Line 118: | ||
==Other information== | ==Other information== | ||
+ | ===Technical infomation=== | ||
+ | {{ii}} V1 / V1.1 (PC Mode): device name: '''FANATEC CSL Elite Wheel Base''', HWID: '''0EB7:0E03''' | ||
+ | {{ii}} Elite+ (PC Mode): device name: '''FANATEC CSL Elite Wheel Base PlayStaiton 4''', HWID: '''0EB7:0005''' | ||
+ | {{ii}} Elite+ (PS Mode): HWID: '''0EB7:0E04''' | ||
===Firmware update=== | ===Firmware update=== | ||
− | {{++}} The Firmware Manager, which is accessible within the Fanatec Control Panel, can be used to update the wheel base and other attached Fanatec products.<ref> | + | {{++}} The Firmware Manager, which is accessible within the Fanatec Control Panel, can be used to update the wheel base and other attached Fanatec products.<ref>{{Refurl|url=https://fanatec.com/media/pdf/a6/ee/64/Driver-Firmware-Instructions-Manual-EN_Web_02_MO.pdf|title=Driver & Firmware Instructions manual - Fanatec|date=June 2023}}</ref> |
{{References}} | {{References}} | ||
+ | |||
+ | [[Category:Steering wheels]] |
Revision as of 12:02, 28 November 2023
XInput support | |
---|---|
Connection method | |
USB-B | |
Predecessor | |
Fanatec ClubSport | |
Successor | |
Fanatec CSL DD Fanatec Gran Turismo DD Pro |
The Fanatec CSL Elite is a racing wheel base released by Fanatec in August 2016.
Being a tier below the high-end ClubSport wheel base, the CSL Elite wheel base has a single gear toothed belt-driven force feedback instead of the dual V-ribbed belts. The brushless motor's torque rating has also been reduced from 8Nm of that of the ClubSport to 6Nm. The wheel base's outer construction is made mostly of ABS plastic, and has the rev indicator LEDs on the top of the wheel base. Just like many Fanatec wheel bases, it has the QR1 quick release and on the back, it has four RJ12 ports for accessories.
The updated V1.1 model, released in June 2019, fixed the issue in the original wheel base where the damper setting is too strong and cannot be turned off, along with using the motor and encoders from the ClubSport wheel base. The PlayStation-compatible version of the wheel base which the V1.1 model is based on, the CSL Elite Wheel Base+, was released in June 2017 as part of a bundle set[1] and later released as a standalone wheel base in June 2018.[2]
On PC, all versions of the CSL Elite wheel base are compatible with games that incorporate Fanatec's SDK, but requires the wheel base to be in PC mode and have Fanatec's own driver installed to work. The wheel base's settings can be further adjusted using the wheel base itself, the driver's Fanatec Control Panel software or, in case of the CSL Elite Wheel Base+, the Fanalab software. While most bundle sets have most, if not all, the required items to work out of the box, the standalone wheel base sets needs other Fanatec products (specifically, a steering wheel compatible with QR1 quick release) to be usable. It doesn't support wheels with QR2 quick release. Button layouts vary between equipped steering wheels/hubs.
General information
- V1 wheel base
- Racing wheel bundle for PS4
- Elite wheel base+
- V1.1 wheel base
- CSL Elite PlayStation Starter Kit (Archived)
Inputs (with CSL Elite PlayStation Starter Kit)
- 1 × 2-axis steering wheel axle with 1080 degree lock-to-lock
- 1 × power button on the base: ᴘᴏᴡᴇʀ
- 1 × rev indicator LEDs on the base
- 1 × mode switch button on the base: ᴍᴏᴅᴇ
- 2 × steering-mounted paddles on the wheel: L1, R1
- 1 × clickable digital directional joystick on the wheel: ↑, ↓, ←, →
- 8 × digital face buttons on the wheel: △ ᴛʀɪᴀɴɢʟᴇ, ○ ᴄɪʀᴄʟᴇ, × ᴄʀᴏss, □ sᴏ̨ᴜᴀʀᴇ, L2, R2, L3, R3
- 4 × digital functional buttons on the wheel: sʜᴀʀᴇ, ᴏᴘᴛɪᴏɴs, PlayStation, ᴡʀᴇɴᴄʜ
- 2 × analog foot pedals on the CSL Elite Pedals: ʙʀᴀᴋᴇ, ᴀᴄᴄᴇʟ
- 1 × rev indicator LED + 3-segment LEDs on the wheel
Availability
- Ever since the release of CSL DD, Fanatec has discontinued the CSL Elite wheel bases and related bundles.
Controller variations
- The original CSL Elite wheel base, also refers to as V1, is a first model ever released.
- The CSL Elite Wheel Base+ is a PlayStation-compatible model. It has serveral improvements including the use of hall-effect sensors on the motor and the steering axle for better steering position tracking and has quicker and long-lasting motor.
- The CSL Elite V1.1 wheel base is essentially a version of CSL Elite Wheel Base+ without PlayStation compatibility.
Use with PC platforms
- Requires the wheel base to be in PC mode.
- MacOS and Linux are not supported.
Windows
- Windows 10 and Windows 11 do detect the wheel, but requires Fanatec driver to be installed to work.
Fanatec Control Panel
- Default software that come installed with the Fanatec driver.
- The steering sensitivity, various force feedback settings, steering locks, pedal sensitivity, shifter/handbrake settings can be adjusted.
- Wheel base's built-in profiles can be customized.
- LEDs on selected Fanatec steering wheels cannot be customized.
- There is no game profile function.
Fanalab
- Note that the compatibility between the driver and the Fanalab software varies from versions to versions, but it is recommended to update both to the latest version.[3]
- The steering sensitivity, various force feedback settings, steering locks, pedal sensitivity, shifter/handbrake settings can be adjusted.
- LEDs on certain Fanatec steering wheels can be customized.
- Wheel base's built-in profiles can be customized
- Support multiple game profiles on per-game basic and support automatic profile switch upon detection of the game.
- Only the CSL Elite Wheel Base+ is compatible with the software.[4]
Hardware
Expansions
Fanatec CSL Elite Steering Wheel WRC
- Officially licensed World Rally Championship steering wheel made for Fanatec wheel bases.
- Rev indicator light.
- Plastic QR1 Lite quick release adapter need to be replaced with QR1 when used in the wheel base with 8Nm or more.
Fanatec CSL Pedals
- Pedal set with 2 hall-effect sensor-based pedals.
- Can be expanded with either CSL Pedal Clutch Kit or CSL Pedal Load Cell Kit.
- Can be directly connected to either the wheel base via RJ12 or to the PC via the Fanatec ClubSport USB Adapter on its own.
Fanatec CSL Pedal Load Cell kit
- Pedal expansion kit with load cell sensor that support up to 60kg.
- Is included as part of the CSL Pedals LC set.
- Has its own control box that allows the expanded CSL Pedals to be directly connected to either the wheel base via RJ12 or to the PC via USB.
Fanatec CSL Elite Pedal V2
- Pedal set with 2 hall-effect sensor-based pedals and a load cell-based pedal. The load cell pedal can support up to 90 kg.
- Elastomer springs and pre-load medal spring can be changed with the included kit for adjustment.
- Has removable rubber pedal plate covers.
- Can be directly connected to either the wheel base via RJ12 or to the PC via USB.
- Has a dedicated RJ12 port for connecting the ClubSport Handbrake V1.5 to.
Fanatec CSL Table Clamp V2
- Aluminum-made table clamp that is compatible with ClubSport, CSL Elite, Podium, CSL DD and Gran Tursimo DD Pro.
Fanatec ClubSport Shifter SQ V1.5
- Shifter with H-pattern (7 gears and a reverse) mode and sequential mode.
- Can be directly connected to either the wheel base via RJ12 or to the PC via the Fanatec ClubSport USB Adapter.
- Must use the ClubSport Shifter Table Clamp to be clamped onto the desk.
Fanatec ClubSport Handbrake V1.5
- Analog Handbrake
- Can be directly connected to either the wheel base or certain Fanatec pedals via RJ12 or to PC via the Fanatec ClubSport USB Adapter.
- Must use the ClubSport Shifter Table Clamp to be clamped onto the desk.
Fanatec QR1 Quick Release Adapter
- Quick release adapter with aluminum construction.
- Use to replace the default plastic QR1 Lite quick release adapter on some Fanatac steering wheels.
Adapter
Fanatec ClubSport USB Adapter
- RJ12 to USB adapter made for Fanatec products.
- Allows the CSL Pedals, ClubSport Shifter and ClubSport Handbrake to be connected to PC without the use of Fanatec wheel bases.
Support in games
- Selected games has native support for the rev indicator LED and OLED screen on certain Fanatec wheels. It is possible for non-supported games to provide support for either functions or both by using 3rd-party wrappers such as Fanaleds.
Other information
Technical infomation
- V1 / V1.1 (PC Mode): device name: FANATEC CSL Elite Wheel Base, HWID: 0EB7:0E03
- Elite+ (PC Mode): device name: FANATEC CSL Elite Wheel Base PlayStaiton 4, HWID: 0EB7:0005
- Elite+ (PS Mode): HWID: 0EB7:0E04
Firmware update
- The Firmware Manager, which is accessible within the Fanatec Control Panel, can be used to update the wheel base and other attached Fanatec products.[5]
References
- ↑ Fanatec Announces PS4-Compatible CSL Elite Wheel - GTPlanet - last accessed on June 2023
- ↑ Fanatec Announces Standalone CSL Elite Wheel Base + for PS4 - GTPlanet - last accessed on June 2023
- ↑ Maurice Böschen's comment in Which version of Fanalab corresponds to which driver version? - Fanatec Forum
- ↑ Maurice Böschen's comment in Tuning Menu Not Finding Base - Fanatec Forum
- ↑ Driver & Firmware Instructions manual - Fanatec - last accessed on June 2023