Controller:Capcom Home Arcade
From PCGamingWiki, the wiki about fixing PC games
This page is a stub: it lacks content and/or basic article components. You can help to expand this page
by adding an image or additional information.
XInput support | |
---|---|
Connection method | |
Bluetooth |
Key points
- It is not a perfect device due to the button configuration on Capcom Home Arcade and there is no more button for D-pad and right analog stick. Thus it does not fit perfectly with those games which must be played with D-pad or right analog stick. However, it is perfect for any 2D fighting games.
- Two controllers in one device.
- USB port only for power supply.
- Requires hardware modification to be able to connect to PC.
General information
Availability
Hardware
IntecGaming Fighting Board Kit for Capcom Home Arcade to Switch Pro/PC/Steam Controller
- Very easy hardware modification. PC recognizes controller as two Nintendo Switch controllers.
- Only Bluetooth connection.
- DIY kit includes: Function Board*1, LED Board*1, LED Wire*1, Hex Nut*2, Rubber Pad*6, Installation Manual*1, Button Stickers*1.
Technical information
Controller button | Button label and axis |
---|---|
L | Button 7 |
ZL | Button 5 |
Y | Button 4 |
X | Button 1 |
R | Button 8 |
B | Button 3 |
A | Button 2 |
ZR | Button 6 |
Left Stick | X-axis, Y-axis |
Sync | L+X+ZR (pressed for 5-10 sec) |
Home | L+ZL (pressed for 5 sec) |
Capture | L+ZL+R+ZR (pressed for 5 sec) |
Switch Mode | L+ZL+L+ZL (pressed for 5 sec) |
IntecGaming Fighting Board Kit for Capcom Home Arcade to PlayStation 4 Wireless Controller
- Very easy hardware modification. PC recognizes controller as two DualShock 4 controllers.
- Only Bluetooth connection. Some users observed problems with Bluetooth protocol on PC.[1]
- DIY kit includes: Function Board*1, LED Board*1, LED Wire*1, Hex Nut*2, Rubber Pad*6, Installation Manual*1, Button Stickers*1.
Technical information
Controller button | Button label and axis |
---|---|
L1 | Button 5 |
L2 | Button 7 |
Square | Button 1 |
Triangle | Button 4 |
R1 | Button 6 |
Cross | Button 2 |
Circle | Button 3 |
R2 | Button 8 |
Left Stick | X-axis, Y-axis |
PlayStation button | L1+L2 (pressed for 5 sec) |
Option | L1+L2+R1+R2 (pressed for 5 sec) |
Switch Mode | L1+L2+L1+L2 (pressed for 5 sec) |
References
- ↑ NOW AVAILABLE - Bluetooth Controller PCB replacement compatible with PS4 - last accessed on June 2023